The purpose with this report is to illuminate the construction solutions and the deformations that could exist in medieval parish stone churches. But also to increase the writers understanding how activity forces effect the construction of the churches. With help from literature and a practical study, containing three churches the writers have collected the material that the conclusions and discussions are built upon in this report. The construction of the churches consists of three parts, the wall, the roof and the vault. The construction solutions are similar in the churches disregard of the roof, where the roof trusses are different.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Bygghantverk, 27 hp, 2013. På omslaget felaktigt 2012..

In this thesis tests has been performed on the pull strength of screws glued into glulam beams.The experiment is based on the already approved method whereby the diameter of the drilled holes is the same as the screw outer diameter of 1 mm or bigger. The screws strength class shall not be less than 4.6 (EN ISO 898-1:1999, 1999).The difference in the experiments that were performed where that the drilled diameter were 1 mm smaller than the outer diameter of the screw so that the screw thread was worked into the wood.In the tests the gluing where made on M8 glulam beams. The screws where drilled at and angel of 90°tangental to the fiber direction with a diameter of 7 mm. The gluing of the screws where made in three different depths and where later exposed to pulling forces. The results showed both pulling breaks and screw breaks when they reached their maximum capacity.

The project has been performed in collaboration with Thule Sweden AB, a global leader in developing safe, simple and elegant solutions for the transportation of various types of equipment. The company has developed a new T-track which is telescopically, they stand mount system to connect the roof box to the roof rack does not fit into this. Therefore, the company considered that it was necessary to have a new product that meets the requirements of the new roof rack. They wanted a new, smarter solution would be developed. The bulk of this essay has been to find a new concept to connect the roof box to the roof racks. The result is a saxkonstruktion that slides down the roof rack T-profile and protected out of a puck-like housing. The product is small, simple and elegant solution.

Today there is an increasing market for businesses concerning horses, and since we are already running such establishments we sort of speak already have a finger in the pie. Due tothe increasing competition and demands, new and more practical constructions have become a necessity. In doing this project I wanted to make a comparison between having a stable integrated with a manege and having both constructions kept separate. I wanted to compare different layout and make an estimate of costs to see which solution would be less expensive and better with regard to working environment. I will further also deal with different ventilation-systems andlight transmissions.

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Trädgårdens hantverk och design, 15 hp, 2015.

The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

I vissa takstolskonstruktioner kan det ibland uppstå stora tryckkrafter i diagonala reglar. I Sverige löser man oftast detta med hjälp av stagning tvärs diagonalen för att hindra utböjning i veka riktningen. Ibland när det är svårt att på plats trä in strävor på grund av utrymmesbrist och dylikt kan man spika eller skruva på en regel för att på så sätt förstärka den diagonala strävan. Detta examensarbete har undersökt två olika förstärkningsalternativ, rektangulärt- och T-tvärsnitt, med hjälp av reglar med dimension 45x95 mm2 vilka skruvas respektive spikas ihop. Detta har gjorts laborativt genom att trycka provkroppar i en provningsram och undersöka hur mycket den axiala kapaciteten ökar med förstärkning.

I vissa takstolskonstruktioner kan det ibland uppstå stora tryckkrafter i diagonala reglar. I Sverige löser man oftast detta med hjälp av stagning tvärs diagonalen för att hindra utböjning i veka riktningen. Ibland när det är svårt att på plats trä in strävor på grund av utrymmesbrist och dylikt kan man spika eller skruva på en regel för att på så sätt förstärka den diagonala strävan. Detta examensarbete har undersökt två olika förstärkningsalternativ, rektangulärt- och T-tvärsnitt, med hjälp av reglar med dimension 45x95 mm2 vilka skruvas respektive spikas ihop. Detta har gjorts laborativt genom att trycka provkroppar i en provningsram och undersöka hur mycket den axiala kapaciteten ökar med förstärkning.

My Finnish grandfather had a passion for architecture, eventhough he wasn?t an architect. In the end of the 1950s he builta wooden summerhouse on a lot outside of a small villagecalled Lempäälä, close to the city of Tampere. Today the lotbelongs to my mother. Every time I visit our summerhouse, itmakes me want to do as my grandfather did ? to build a smallhouse next to it.My project is a proposal for a wooden house on mymothers lot.

The background to this final thesis is that our mandator, A-hus, was interested to examine which roof system that would be most appropriate to their types of houses. To investigate this, we first conducted an evaluation of the most commonly used roof systems in Sweden today: decking, board, roof cloth and prefabricated roof cassettes.To gather information about the different systems we have conducted interviews with several professionals within the construction industry, done an extensive literature study, and gathered information from the Internet.Based on the evaluation of roof systems and the literature, we analyzed advantages and disadvantages of the roof systems from three main perspectives: system characteristics, economics and other characteristics. We found these perspectives to be the most relevant when selecting a roof system.The main perspectives comprise three categories which are graded. These grades are then added together for a score for each main perspective and a total score for the three main perspectives. Then we compared the systems and, based on the scores, suggested one roof system as the most suitable for A-hus.Our result suggests that the prefabricated roof cassettes probably is the best solution for A-hus, but only if it is possible to standardize the cassettes and still maintain the flexibility to match A-hus? house types.

In a city sometimes conflicts arise between either to save the species-rich vacant lots where many species thrive, or to build new buildings. Green roofs can then serve as a refuge for plants and animals that have had their natural habitat destroyed or diminished. Today we know too little about green roofs contribution to the biodiversity in the cities. We also know very little about how various types of vegetation on roof can increase biodiversity and its ability to attract different species.The aim with this study was to examine how different types of vegetation on the roofs affect the biodiversity of the invertebrate and how species-composition and number of individuals differ between the roof- and groundlevel.This study has been carried out on Augustenborg Botanical Roof Gardens in Malmo, and in an area about 1.5 kilometers away from Augustenborg. Three different types of vegetation on the roof and ground floor were selected: sedum- ruderal and grass.

The purpose of this of this essay is to explore the construction of a conservatory that is livable allyear around. When you build a conservatory there are several factors that need to be regardedthat usually are of no importance when you build a regular conservatory. The glassed facadeneeds to have a very good U-value and all the parts of the facade need to be isolated and theconstruction needs to prevent thermal bridges.In this essay we will start by looking at the shape of the conservatory. Due to the façade consistsof glass the conservatory will need to have a good ratio between the area and the façade so thatthe heat losses will be at a minimum. However, due to the fact that one of the sides of the façadeis connected to the warm house, you quickly realize that the shape of the conservatory is of noimportance.There are two common ways to build a foundation for a conservatory, a molded concretefoundation and isolated wooden beams.

?Boverket? the Design Regulations in Sweden, also called BKR has for a long timebeen the mandatory standard that has guided and regulated construction design. Butat the end of 2010 BKR was replaced with Eurocode. This report deals with thecomparison of these two standards when it comes to wood construction. Duringwinter 2009/2010 there were many roof collapses due to excessive loads on theroofs across Sweden.